| Product Name |
Mavic 4 Pro Landing Gear, Water Floating Landing Gear Training Kit Floating Holder Leg for 4 Pro Accessories |
| Item NO. |
4581389 |
| Weight |
0.256 kg = 0.5644 lb = 9.0301 oz |
| Category |
FPV Drone and Part
|
| Brand |
FEICHAO |
| Creation Time |
2025-07-09 |
Water Floating Heighten Landing Gear: Landing on the water surface, increased 36mm ground clearance, effective protection. Reducing chassis wear can better protect the device and gimbal.
Lightweight Design no Weight-Bearing Sensation: The weight of the entire set of height increasing tripod and buoyancy rod is only 112g, which hardly increases the flight burden
Precautions for Use: Installing buoyancy rods can only take off and land on calm water surfaces. Cannot be on water with waves, otherwise there is a risk of overturning the device.
Strap Fixation for Easy Disassembly: Elastic strap fixed installation is simple, easy to disassemble, and reusable. Removing the float can also be used separately.
Installation Precautions: Due to the weight of the lens, the reserved length at the front end of the buoyancy rod needs to be about twice that of the rear end.
1. First, put the landing gear on the elastic strap
2. Install the floating fixed position
3. The tripod hooks onto the front and rear arms of the drone
Gently push forward and then hook into the landing gear
4. Install on both sides in the same way, pay attention to distinguishing the landing gear. (Note: Confirm installation direction
Lis the left arm and R is the right arm.)
No related record found